Parts and Accessories

Chinstraps

A chinstrap is designed to keep the mouth closed when using CPAP. It is commonly used among Mouth Breathers. There are a number of chinstrap choices at Clinical Sleep Solutions. They differ in sizes and elasticity. If you have not used a chinstrap before, please contact our Therapist for a fitting appointment.

Examples:

Deluxe Chinstrap
Resmed Chinstrap
Universal Chinstrap

Connectors and Adapters

O2 Adapter

This O2 Adapter will connect directly to the CPAP/BiPAP unit and allow the patient to bleed in oxygen with therapy.

Tubing Adapter

Tubing Adapter is used to connect the tubing and the CPAP machine. It can extend the life of the tubing by preventing the silicone cuffs on the ends of the tubing to wear down.

Tubing Coupler

Designed to join two CPAP tubing together to create a longer tubing.

Outlet Swivel Adapter with Pressure Lining

This is used for specific older CPAP models such as Virtuoso Auto CPAP unit that require a “pressure line” attached to the machine to monitor oxygen.

Filters

We carry a full range of Foam Filters and Ultra-fine Filters for various CPAP/BiPAP models, including Respironics, Fisher & Paykel, GoodKnight, Devilbiss, etc.

Headgears

We carry a full line of Headgears. The most common ones are:

Respironics Deluxe Headgear
Ultra Mirage Headgear
Fisher & Paykel Headgear

Humidifier Parts

Fisher & Paykel Water Chamber
Remstar Water Chamber
Remstar Heat Plate

Mask Parts

We have hundreds of parts for our CPAP masks. Some popular replacement mask parts include:

Breeze hose guide
Breeze plenum nasal shell
Nasal Pillows (various sizes)
Comfort Series Cushions and Silicone Flaps
Fisher & Paykel 405/407 Seal Kit (Foam Seal and Silicone Seal)
Forehead spacers

Power Cord and Accessories

Respironics DC Battery Adapter System

Content of package includes Cigarette Lighter Cable, Battery Adapter Cable, and Fuses. This system is designed for the use of Remstar CPAP machines. This setup will allow you to connect your CPAP machine either to a cigarette lighter adapter in your vehicle, or directly to a 12 V DC battery. Please note that the amount of time your machine will run on a battery depends on your pressure setting and the amp-hour rating of the battery. It is recommended to use a deep-cycle marine battery or a gel cell battery.

Respironics Cigarette Lighter Adapter

Connect the Remstar CPAP to a standard 12V DC vehicle cigarette lighter and you can use it in a RV or a car.

Power Cords

We have all kinds of power cords for various CPAP/BiPAP models

Fuses

GoodKnight 420 Battery Cable

With this DC battery adapter cable you can run your GoodKnight 420 series CPAP machine off of a 12V stand alone battery (perfect for camping). A deep cycle marine battery or a motorcycle battery is recommended so that you will get significant usage time between charges.

GoodKnight 420 Series Cigarette Lighter Cable

With this DC battery adapter cable, you can plug your Travel-sized GoodKnight 420 CPAP machine into any 12 volt cigarette lighter adapter.

Tubing

The standard tubing is 6 feet long. It is smooth-bor (smooth interior), which is designed to make it quieter and causing less air resistance. The ends of the tubing are made of silicone-rubber. (8 feet tubing also available.)

Tubing with pressure line

This is a standard 6 feet tubing with an oxygen tubing line that runs through the CPAP tubing. The popular GoodKnight 420S and 420E require the use of this tubing.

CSS Tube Warmer